Motor

Imported motor specially used for high speed rolling doors ; three phase 380V ; and single phase 220 V power : 0.55-1.5KW,IP55 50HZ.

Door Leaf 
• mm. high density polyester fiber or 1.5 mm transparent PVC soft sheet made in France.

Door Frame and Roller Cover
2.2 mm thick high quality cold rolled steel and 4 mm thick motor cabinet, adopting the electric powder coating, the standard color is ivory white (A little milky yellow)

High speed opening-closing feature
All high speed rolling doors can realize the opening –closing speed 0.7 to 1.2 m/sec which is suitable for the application where logistical route is frequently used while it also meets the required concerning relative sealing.

Photocell Safety (Standard)
The photocell safety switch is a set of correlation infrared device installed under the door track. When the rolling door is closing, if a person or an object blocks the correlation infrared, the door will rise to the reverse direction

Specification  
The MAXIMUM OPENING : W6OOOmm x H6OOOmm.

Bottom Edge Safety (Standard)
For the additional safety the bottom edge safety is an optional safety device. If the door is closing, slight collision between the bottom edge and any object will open it to the opposite direction.

Colors
The customers may choose the rolling door in different colors such as yellow, orange, blue, white, transparent or half transparent to match the surroundings.

Mode of control
1. Push button type
2. Pulling rope type
3. Remote control type
4. Geomagnetic loop type
5. Radar induction.

 

Mode of opening
The roller rolls up the door leaf, and abating the noise by sealing brush in the track.